Crown LPS 2500

Fiche technique

Puissances (1 kHz with 0.5% THD)
- 2x725W en mode stéréo 4 ohms
- 2x550W en mode stéréo 8 ohms
- 1x1450W en mode bridge-mono 8 ohms

Spécifications:
- Sensitivity (for full rated power at 4 ohms) : 1.25 V rms
- Frequency Response (at 1 watt) : 40Hz – 20kHz, +0dB/-3 dB
- Signal-to-Noise Ratio (below rated power, 20Hz – 20kHz, A-weighted) >100 dB
- Total Harmonic Distortion (THD) <.5%, 20Hz – 20kHz
- Intermodulation Distortion (IMD) (60Hz and 7kHz at 4:1 from full rated output to -30dB) <.3%
- Damping Factor (8 ohms, 10Hz – 400Hz) >300
- Crosstalk (below rated power) at 1kHz: -76 dB at 20kHz: -58 dB
- Input Impedance (nominal) : 20 kilohms balanced, 10 kilohms unbalanced
- Load Impedance (Note: safe with all loads) : 4 and 8 ohms in stereo mode, 8 ohms in bridge-mono
- AC Line Voltage and Frequency Configurations Available (±10%) : 120VAC/60Hz 220VAC/50Hz 240VAC/50Hz
- Ventilation: Flow-through ventilation from front to back
- Dimensions: Width, Height, Depth
EIA Standard 19 inches (48.3cm) rack mount wide, 3.5 inches (8.9cm) high, and 15.2 inches (38.6cm) deep
- Net Weight, Shipping Weight 13.5kg, 32.8 14.9kg

Produits complémentaires