Dbx DRIVERACK PA+

Fiche technique

• 2 entrees symetriques XLR
• 6 sorties symetriques XLR
• 1 entree micro RTA
• Conversion : dbx Type IVR
• Gamme dynamique 110 d pondere A, 123 dB avec Type IVR
• Frequence d'echantillonnage : 48 kHz
•Distorsion : 0.002% @ +4 dBu, 1 kHz
•Reponse en frequence : 20 Hz a 20 kHz, +/-0.5 dB
•Diaphonie : >110 dB

Analog Inputs

Number of Inputs:(2) Line inputs. (1) RTA Mic input Connectors:(2) Female XLR line inputs, XLR RTA Mic input Type:Electronically balanced/RF filtered Impedance:> 40k ohm Maximum Input Level: >+20dBu CMRR:>45dB RTA Mic Phantom Voltage+15VDC RTA Mic EIN:< -117dBu, 22Hz-22kHz, 150

Analog Outputs

Number of Outputs: (6) Line Outputs Connectors: Male XLR Type:Electronically balanced, RF filtered Impedance:120 ohms Max Output Level:+20dBu CMRR:>45dB Alignment Delay:10ms per channel (60ms total)

A/D Performance

Type: dbx Type IV conversion systemDynamic Range: 110 dB A-weighted, >107 dB weighted Type IV dynamic range:123 dB with transient material, A-weighted, 22kHz BW
121 dB with transient material, unweighted, 22kHz BW
115 dB typical with program material, A-weighted, 22kHz BW Sample Rate:48kHz

D/A PERFORMANCE

Dynamic Range: 112 dB A-weighted, 110 dB unweighted Sample Rate: 48kHz

SYSTEM PERFORMANCE

Dynamic Range: 110 dB A-weighted, >107 dB weighted THD+N:0.004% typical at +4 dBu, 1kHz 0 dB input gain Frequency Response:20Hz - 20kHz, +/-0.5dB Interchannel Crosstalk:< -110 dB, -120dB typical Crosstalk input to output:<-100 dB

POWER SUPPLY

Operating Voltage100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz Power Requirements25 W

PHYSICAL

Weight:5.5 lbs.(2.5 kg) Shipping weight 7 lbs. (3.18 kg) Dimensions:1.75� (4.4cm) H x 5.75�(14.6cm) D x 19� (48.26cm) W