Alto APX 1500

Fiche technique

Power Specifications: 
Continuous power (20 Hz – 20 kHz):
Both channels driven: 2 x 540 W at 4 ohms, 2 x 340 W at 8 ohms (0.5% THD);
 2 x 750 W at 4 ohms, 2 x 370 W at 8 ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1500 W at 8 ohms, 1 x 740 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power) 20 Hz - 25 kHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) <0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: AC power switch, 2 channel level control; –∞ to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / ¼” combo 
Output: Touch proof binding posts and Speakon® NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 - 240 VAC (50 / 60 Hz)

  Dimensions (WxLxH): 483X285X90 mm
Weight: 16 Kg

Produits complémentaires