PACK EON 515 XT+ FX16 ii +FLIGHTCASE

Fiche technique

EON 515
System Type: Self powered 15", two-way, bass-reflex design
Frequency Range (-10 dB): 39 Hz -20 kHz (EQ in ‘Flat' position)
Frequency Response (±3 dB): 42 Hz - 18 kHz (EQ in ‘Flat' position)
Coverage Pattern: 100° H x 60° V nominal
Directivity Index (DI): 9 dB
Directivity Factor (Q): 8
Crossover Frequency: 2.2 kHz
System Power Rating: 450 W continuous, 900 W peak
LF Power amp: 350 W continuous at driver impedance
HF Power amp: 100 W continuous at driver impedance
Distortion: Less than 0.1% at rated power
Maximum SPL: 129 dB
Signal indicators: Limit: Red LED indicates input overload condition
Signal: Green LED indicates signal present
Mic/Line: Red LED indicator
Input Gain (input 3): Mic position: -Infinity to +40 dB
Line position: -Infinity to +4 dB (+20 dBu Max signal input)
Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)
Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)
Boost EQ: LF +3 dB Shelving Filter @ 200 Hz
HF +2.5 dB Shelving Filter @ 4 kHz
Low Cut Filter: Preset high pass @ 120 Hz
LF Driver: 1 x JBL 265F-1 380 mm (15 in) Differential Drive® integrated
woofer with dual 2" voice coils
HF Driver: 1 x JBL 2414H 25.4 mm (1 in) neodymium compression driver
Input 3 connector: Balanced XLR / ¼ inch TRS combo jack with XLR loop through
Input 1 & 2 connectors: Balanced ¼ inch TRS jack
Output (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX position
XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
Limiting/Protection: Dynamic Limiter
Enclosure: PP impact copolymer, multi-purpose main & monitor orientation.
Handles: One left/right side, one on top, with rubber grip
Suspension / Mounting: 36 mm pole socket with stabilizing screw, 4 x M10 suspension
points, 1 x M10 pull-back point
Grille: Powder coated perforated steel with acoustically transparent
black screen backing.
AC input: 120 - 240 V, 50/60 Hz
Dimensions (H x W x D): 685 x 438 x 366 mm (27.0 in x 17.3 in x 14.4 in)
Net Weight: 14.8 kg (32.5 lb)

FX 16ii
Niveau de Bruit
- Mic EIN @ gain max, 150 Ohms : -128 dBu
- Sortie Mix (Mix 0 dB , fader baissé) : < -82 dBu

· Réponse en Fréquences : 20Hz - 20kHz, +/- 1 dB

· Distorsion + Bruit : Mic gain -30 dBu, +14 dBu mix @ 1

kHz : < 0.09 %

· Séparation de voies :

- mute : > 90 dB @ 1 kHz
- fader baissé : > 88 dB
- départs effets mini : > 84 dB

· Impédance

- Entrée Micro : 1,8 kOhms
- Entrée Ligne : 18 kOhms
- Entrée Stéréo : 65 kOhms
- Sortie : 150 Ohms (Sym)

· Correcteur (voie mono)

- HF : 12 kHz, ±15 dB
- MF : 150 Hz - 3,5 kHz, ±15 dB, Q=1.5
- BF : 80 Hz, ±15 dB

· Niveaux d'entrées/sorties

- Entrée micro et stéréo niveau max. : +20 dBu
- Entrée ligne niveau max : +30 dBu
- Sortie niveau max. : +20 dBu
- Sortie Casque : 300 mW (150Ohms)

· Consommation : < 40 W

· Dimensions : Sur table, 160 x 444 x 460 (mm)

En rack, 443 (10U) x 482 x 160 max./64 min (mm)

Produits complémentaires